Connection cable with flat connection
150 mm² - 1.000 mm²
For quick connection of movable current users, for easy assembly in edgy and cornered areas, avoiding a fixed installation of current solid guidance.
The cable is made from stranded high flexible and flexible pure E-Cu Ropes with cross sections up to 1000 mm².
Rectangeled terminals have been pressed on made from seamless E-Cu tubes contact efficient; Assembly holes can be drilled to requirements.
Due to different applications we offer different protecting hoses for insulation. There are:
Cable and terminals pure E-Cu, no insulation.
Cable with PVC hose from 1mm to 4mm wall thickness for temperatures up to 80°C, resistant against most acids and bases.
Silicon cable insulation or Glas-Fibre and Aramid for temperatures until 250°C.
Cable insulated with electro- industrial hoses, similar to water-cooled power cable.
A robust design with high insulation values yet limited flexibility, especially in short length cables.
Beside these four designs a combination of e.g. first PVC or Silicon and as a second layer Aramid hose for protection against mechanical damage.
Please, note that for the calculation of electrical efficiency (Ampere) that insulation as well as parallel circuits will decrease possible current.
|Cable Cross Section mm²||Current in Ampere from DC (pure E-Cu)||Dimension of Contact Area Length x Width||Standard Single Wire* Diameter mm||order request|
|900||1650||after arrangement||after arrangement||after arrangement||0.3||Request|
|1000||1800||after arrangement||after arrangement||after arrangement||0.3||1||Request|
|Cable Cross Section mm²||Current in Ampere from DC (insulated)||Dimension of Contact Area Length x Width||Standard Single Wire* Diameter mm||order request|
|900||1350||after arrangement||after arrangement||after arrangement||0.3||Request|
|1000||1450||after arrangement||after arrangement||after arrangement||0.3||1||Request|